Tuesday, February 11, 2014

Erishkigal Skully Snowflake


ERISHKIGAL SKULLY SNOWFLAKE

Here is the pattern you've been waiting for!
This winter, a friend posted a picture of a paper skully snowflake.  I was absolutely enchanted!  I had just begun to crochet, being confined to a cast after breaking my hand.  This friend then challenged me to come up with a good skull snowflake, and so this pattern was born.

The inspiration for this pattern comes from The Lost Souls Shawl, a great pattern; I recommend you check it out!

For this pattern I recommend that you have some experience with crochet.  If there are parts that hang you up there are great resources on youtube and ravelry to get you going again.

Here's a huge caveat.  I've been cranking out snowflakes all winter long.  None of my skully snowflakes have the same center.  I've written one out here for you but feel free to play and change it up a little bit.  I also vary with hearts at the tips of the snowflake arms, or "crown points" (see photos).  Your choice, I'm going to put both options in here for you.



Materials:
#10 crochet thread
Hook appropriate for you and the thread; I use a 1.75 mm

Begin:
1) Ch 6, join with a ss to the first stitch on the chain.
2) Ch 12, tr into ch sp, *ch 8, tr into ch sp.  Repeat 4X from *, join with ss in 4th ch of original ch 12.
3) Into next ch sp (3sc, 2dc, ch1, 2dc, 3sc).  Repeat into each ch sp, to fill out the "petals". SS join.
4) SS to the ch 1 at the top of the next petal.  Ch 3 (counts as 1st dc); dc, ch1, 2dc, ch7 to next ch 1 sp on next petal.  (2dc, ch1, 2dc in ch1 sp, ch7) in each ch 1 sp, x5.  SS join into top of ch 3 at start.

Here's where we're going to repeat a lot.  To simplify things, I'm going to compress it a little.
"Start" is how we'll start each successive round for a bit.  It looks like this:
SS into ch 1 sp.  Into the ch 1 sp: (Ch 3 (counts as 1st dc), dc, ch 1, 2 dc); ch 3.  This creates the skeleton effect next to the skulls.  Anytime I write "start" please follow the above.

5) "Start". *7dc onto the 7ch from previous round, ch 3, (2dc, ch 1, 2dc) into ch 1 sp, ch 3.  Repeat from * around, and join your last ch 3 with a ss into the top of the ch3 that you started with.
6) "Start". *sc into the first of the 7 dc of previous round. ch 7. Sc into last of the 7dc, ch 3, (2dc, ch 1, 2dc) into ch 1 sp, ch 3.  Repeat from * around, and join your last ch 3 with a ss into the top of the ch3 that you started with.
7) "Start". *7sc onto the 7ch you made on the last round, ch 3, (2dc, ch 1, 2dc) into ch 1 sp, ch 3.  Repeat from * around, and join your last ch 3 with a ss into the top of the ch3 that you started with.
8) To make this round work right: you're noticing a pattern here, right?  That you make the vertebrae first, and we're filling in the skull in between.  So each ch 3 is linking the vertebrae to the skull.  For this round, you need to cheat a little and use the last ch of the ch 3 before the 7sc so it all makes sense.  I hope that was clear.  Ok, here we go:
"Start". *3sc, 1dc, ch1 and sk 1sc (in the middle), 1dc, 3sc all onto the previous 7 sc (with the wiggle room at the sides.  You'll see, just trust me).  Ch 3, (2dc, ch 1, 2dc) into ch 1 sp, ch 3.  Repeat from * around, and join your last ch 3 with a ss into the top of the ch3 that you started with.

Now it should look like a chin, open mouth with a little nose hole.  Cute, huh?  I could kiss the lady who invented this skull.

9) "Start". *hdc into 1st sc of previous row, ch 7, sc into ch1 sp ("nose"), ch 7, hdc into last sc of previous row, ch 3, (2dc, ch 1, 2dc) into ch 1 sp, ch 3.  Repeat from * around, and join your last ch 3 with a ss into the top of the ch3 that you started with.  (Eyes!)
10) "Start". *sc into the hdc to anchor, 7 sc onto the 7ch, then 7 sc onto the next 7ch, sc into the last hdc, ch 3, (2dc, ch 1, 2dc) into ch 1 sp, ch 3.  Repeat from * around, and join your last ch 3 with a ss into the top of the ch3 that you started with.

Now we're going to develop the arms of the snowflake, having finished our vertebrae.  Things are going to get a little bit different.

11) Sl st over to the skull.  Skip 1st st.  *Sc next 6 sts, skip 1 sc, sc next 6 sts, Ch 20, ss join on next skull at the 2nd sc (so that you skip that 1st st).  Repeat from * around, until all skulls are joined.
12) *Skip 1st st, sc over next 10 sts, skip last (ss to your ch 20).  Here is where you choose 12a) hearts or 12b) crown points for your snowflake arms.

12a: Hearts) On the ch20: 15sc, 3hdc, 3dc, heart: (ch5, 1dc in 3rd cfh, 1 dc next ch, [1dc] next ch; ch4, 1dc in 3rd cfh, 1dc next ch, 1dc into top of [1dc]; ss into first of the 5ch to join the arch), 3dc, 3hdc, 15sc, ss onto skull at bottom of ch20.

12b: Crown) On the ch20: 15sc, 3hdc, picot (ch4, sc into 3rd cfh, ch1), 3dc, picot, 3dc, picot, 3hdc, 15sc, ss onto skull at bottom of ch 20.

With whatever you choose, repeat from * plus 12a or 12b around.  SS , weave in threads, starch it up and pin it to really get it sharp, and admire your amazing handiwork.



34 comments:

  1. LOVE this! Thank you for sharing it.

    ReplyDelete
  2. This is amazing! Thanks so much for sharing the pattern.

    ReplyDelete
  3. Can you please advise on round 6) "Start". *sc into the first of the 7 dc of previous round. ch 7.
    *******Sc into last of the 7dc, ******
    ch 3, (2dc, ch 1, 2dc) into ch 1 sp, ch 3. Repeat from * around, and join your last ch 3 with a ss into the top of the ch3 that you started with.

    Is this the same 7 doubles that you just singled into? Thank you for this wonderful pattern. Truly unique.

    ReplyDelete
  4. After Step 1, there is no instruction for ch sp to put a tr in...did I miss something?

    ReplyDelete
  5. Oops, I see I neglected this blog. I'm so sorry! I hope you were able to finish the project without my help. My apologies!!

    ReplyDelete
  6. Oh this is more then awesome....I can see these added to a Halloween scene and being asked for the pattern. Oh what joy you have brought to the world. This is, like I said, MORE than awesome! Thank you for sharing your great skill, even wearing a cast!

    ReplyDelete
  7. i just made one and it is AWESOME....

    ReplyDelete
  8. This is awesome!! Thank you so much!!!

    ReplyDelete
  9. This is awesome!! Thank you so much!!!

    ReplyDelete
  10. This is awesome!! Thank you so much!!!

    ReplyDelete
  11. I can't wait to make this for my fellow Arch/forensic buds for Christmas! Thank you big time :)

    ReplyDelete
  12. I can't wait to make this for my fellow Arch/forensic buds for Christmas! Thank you big time :)

    ReplyDelete
  13. Mind you, I see faces everywhere and I clearly see a rather demonic skull inverted between the 'friendly ones! Pointed chin & nose, V-shaped, laughing mouth, squinty eyes on same level as other skulls open ones. 2 for the price/effort of one! NOW; if you would just attach this inside a circle and continue on into a slouchy, perhaps with a couple of rows of skuls in the body...................?

    ReplyDelete
  14. Cannes i habe this in german?
    Ich love it

    ReplyDelete
  15. Cannes i habe this in german?
    Ich love it

    ReplyDelete
  16. thank you so much for sharing this!looked so difficult but wasn't at all and it turned out really nice!

    ReplyDelete
  17. Just by reading the pattern it is pretty confusing. I am an advanced crocheter. I know it is at times difficult to write a pattern but it is always best to use standard American crochet terminology.

    ReplyDelete
  18. Thank you for posting this, love the way you wrote it out, helped in figuring how to make the sculls.

    ReplyDelete
  19. OMG I love these! I wish I could crochet! How big are they when done?

    ReplyDelete
  20. Thank you for writing up this pattern! I love it! I've finished my first one - just need to block it now. I didn't even take the time to print out the pattern before I started it! I was surprised how quick & easy this was to make.

    ReplyDelete
  21. Thank you - I just made this up last night -- and for lack of better words, it's cute.....

    ReplyDelete
  22. Does anyone know if there is a video for this? I'm a beginner and I'm having trouble visualizing the instructions =P

    ReplyDelete
  23. Is there possibly a diagram for this also? I love the pattern but sometimes the written instructions are a little confusing so I like a diagram to refer to. Thanks!

    ReplyDelete
  24. I love love love this. I've made so many, I've almost memorized it. :) have you ever thought of expending it, to say, two rows of skulls? Could that be Done? Lol

    ReplyDelete
  25. Thank you for the pattern. This is awesome. Are people allowed to sell finished snowflakes? I saw on Ravelry that the pattern cannot be reproduced and sold which only makes sense, it is free.

    ReplyDelete
  26. "I could kiss the lady who invented this skull." I I couldn't agree with this sentiment more! I totally enjoyed making her shawl, and have made many coasters and single skulls from her original pattern myself. Thank you for taking inspiration in her Lost Souls and creating this lovely snowflake also. I have enjoyed making it!!

    ReplyDelete
  27. I'm really struggling with step 8, specifically "3sc, 1dc, ch1 and sk 1sc (in the middle), 1dc, 3sc all onto the previous 7 sc (with the wiggle room at the sides. You'll see, just trust me)". This doesn't make any sense to me. 3sc, 1dc, ch, sk, 1dc, 3sc, these things do not fit into the 7 sc in the previous round. Am I supposed to also somehow crochet into the previous 3ch and the 3ch after from the previous round? Am I supposed to do anything with the wiggle room? I love the pattern, so I really wish I was able to make it.

    ReplyDelete
    Replies
    1. I was confused too. This might be clearer - sc into ch3 space, sc in each of the next two sc, dc in next sc, ch1, sk next sc, dc in next sc, sc in each of the next two sc, sc in ch3 space

      Delete
  28. I'm using this pattern as the basis for a motif that I'm using to make a doily for a friend. I've altered the last two rounds to make the motifs join more nicely, and I've written out those alterations and instructions for joining those motifs on my blog.

    http://stitchwhisper.blogspot.com/2021/07/using-snowflakes-as-motifs.html

    ReplyDelete
  29. Replies
    1. I also would like to know what CFH is... even Google can't tell me.

      Delete
    2. I know this reply is a bit late but here is the answer to what cfh is ... Chain From Hook. Yes, it had me going, too.

      Delete
  30. A circuitous Google search and leap of faith has turned up 'chain from hook' as the meaning of CFH

    ReplyDelete